Suppression circuit "C"
Bipolar and tripolar suppression circuits are made by the capacitor 2M2/100V or 2M2/200V separately, or parallel, alternatively serial connection of the mentioned capacitors. The suppression circuit configuration inclusive of the fastener is shockresistant and airproof suffused by the epoxy resin in a plastic case with self-estinguishing effects. Bipolar and tripolar suppression circuits decrease the disturbing signals level at the DC supply network up 100V, if need be up 200V, it does not matter the voltage polarity connected to the suppression circuits.



Specified standards
Suppression circuit "CD"
The basic group of bipolar protecting and suppression circuits is composed by the parallel combination of capacitor 2M2/100V and power zener-diode. The protecting and suppression circuits CD 01 and CD 01/8 are determined for the voltage protection of the DC supply network 12V from power voltage peaks over 24V. The circuit CD 01/8 differs from the protecting and suppression circuit CD 01 only in the diameter of the cable outlet termination, which is 8 mm at the circuit CD 01/8. The bipolar protecting and suppression circuit CD 03 is determined for the voltage protection of the DC supply network 24V from power voltage peaks over 30V. Bipolar protecting and suppression circuits are together with the fastener (minus outlet of the cell) shockresistant and airproof suffused by the epoxy resin in a plastic case with self-estinguishing effects.



Specified standards
Rectifier "N line"
The new line of bridge rectifiers and one way rectifiers is solved in the plastic case (PA 66) and the connection to the control element and to the action cell is made by the terminal block. Rectifiers are determined for general using with respect for inductive loading. The product is delivered with the interconnection between the terminal block outlets +1 and +2, this solving enables the rectifier control on the input and on the output. The rectifiers are determined for the input voltage 230V and 400V, the maximum current consumption is 1A.



Specified standards
One way rectifier
The line of one way rectifiers is delivered for the input AC voltage 290V and 400V, in the same performing as bridge rectifiers, they differs only by the length of outlets for action cell connection with the fastener or without it.



Specified standards
Two way rectifier
The line of bridge rectifiers type UM 01 (with the fastener) and UM 02 (without the fastener) is determined for general using with respect for the inductive loading. These rectifiers are determined for the input AC voltage 230V and maximum current consumption is 1A. The string outlets of rectifiers are made from conductors with the determined colour and diameter, the conductor type is CSA 0,35 according to the standard ÈSN 34 7447. A customer can also determine different outlets lengths for his applications. The bridge rectifiers are suffused in a plastic case with self- -estinguishing effects.



Specified standards
VF filter
The highfrequency filter VF 16 is solved as the tripolar filter, which is used for the suppress of disturbing highfrequency signals arising e.g. from DC motors operation. The basic using of the filter VF 16 is in vehicles equipped with warning lights. The highfrequency filter is connected to the action cell by outlets with the determined colour and diameter. All system is suffused in a plastic case with self-estinguishing effects and it makes the airproof compact unit.





Specified standards
Diode block
The three-phase diode block 630MA is determined as a rectifier for supply sets of person motor-cars. The diode block is determined for the direct assembly onto the alternator body with outlets for the connecting of the stator winding and alternator loading. It is made in two modifications: for the 70A alternator (types 630MA, 830MA) and for the 90A alternator (types 640MA, 840MA). The three-phase rectifier configuration is made by the connecting special power rectify diodes and it is completed with the suppression capacitor. The three-phase rectifier can be used as a DC voltage source of a high performance at the three-phase generation, if the corresponding cooling is ensured.



Specified standards
Lighting extender
The interior lighting extender IC 08 serves for the delayed switching-off the interior lighting of a motor-car. After the motor-car front door are shutted ( the ceiling light position in régime with the switching-on of the door contact) the delayed switching-off the interior lighting of a motor-car at cca 12 sec will be realized, if the motor-car is not start in this time. If this time prolongation passes, the lighting will switch-off. If the sparking circuit is switch-on in the period of the time prolongation, the interior lighting will switch-off. The lighting extender IC 08 is made by SMD technology on the PC board and with mechanical contacts it forms the compact unit. This unit is put into the plastic case, which forms two special connectors by its design. The lighting extender IC 08 is adapted for the direct assembly on the body of the interior lighting for motor-cars, which are equipped with the ceiling lamp 443 313 132 102. The circuit is reverse polarity protected!



Specified standards